Jufu Water Technology Co., Ltd
Water Treatment Equipment Expert Worldwide!
Add to Cart
Reverse Osmosis System 500LPH One Stage RO Water Treatment Plant
Reverse osmosis system process:
Reverse osmosis technology is the most advanced and energy efficient separation technology. The principle is to separate solute from solvent in solution by selective interception of a semi-permeable membrane that only allows water to pass through but not other substances under pressure higher than the osmotic pressure of solution. The separation characteristics of reverse osmosis membrane can effectively remove impurities such as dissolved salt, colloid, organic matter, bacteria and microorganisms in water. It has the advantages of low energy consumption, no pollution, advanced technology and easy operation and maintenance.
Technical Specifications of RO Water Treatment System
| 500LPH Reverse Osmosis System | |
| Model | JFRO-500L |
| Host Size | 800x600x1600mm (can be customized) |
| Power | 1.5KW |
| Power Supply | 220V /380V/460V - 50Hz/60Hz,220V 50Hz can be customized |
| Operating Pressure | 0.8-1.2MPa |
| Recovery Rate | 50% |
| Designed Water Inlet | 1000L/h |
| Outlet Flow | 500L/h |
| Desalination Rate | ≥99.5% |
| RO Frame | SUS304 |
| Membrane Size | 4040 |
| Membrane Elements | DOW /Hydranautics/Troy/ Vontron (Optional) |
| Number of Membranes | 2 |
| Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
| Raw Water Pump | CNP/NYP/GRUNDFOS (Optional) |
| Tank Material | SS/FRP (Optional) |
| Control Valve | Manual/Automatic |
| Control Valve Brand | FLECK/RUNXIN |
| Membrane Housing | SS/FRP (Optional) |
| Pipe Material | U-PVC, Stainless steel (Optional) |
Application status of reverse osmosis:
In various membrane separation technology, reverse osmosis technology is the most successful and fastest growing in recent years the domestic application and popularization of the most widely, estimates that since 1995, in the use of reverse osmosis membrane increasing by an average of 20% a year, according to conservative statistics, in 1999 industrial reverse osmosis membrane element of market supply is 8 inches membrane, sixteen thousand, 4 inches, twenty-six thousand.
Process flow of RO Water Treatment System
Raw water → Raw water tank → Raw water pump → Multi-media filter (quartz sand filter) → Activated carbon filter → Soft water processor → Precision filter → High pressure pump → Primary reverse osmosis (RO) device → Purified water tank → High pressure pump → Two Stage reverse osmosis → ultraviolet sterilization device → water point.
Photos of reverse osmosis water treatment system
FAQ:
1. What is the design water yield of ro membrane element? (except anti-pollution membrane and seawater desalination membrane)
Model 4040 is designed by 0.25m3/h
Model 8040 is designed by 1-1.2m3/h
2. What is the material of mechanical filter?
Carbon steel, stainless steel, fiberglass
3.What are the multi-way control valves?
Manual control valve, automatic control valve
Multi - way control valve is divided into: filter valve and softening valve
Automatic control valve is divided into: time type and flow type.
Multi-way control valve brands are: FLECK, AUTOTROL, Runxin, clean source, etc.